3rd-4th Gear Synchronizer: Notes

WARNING: This page is about a different variant/trim than selected.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Special Tool(s) / General Equipment

Courtesy of FORD MOTOR COMPANY	205-068 Installer, Drive Pinion Bearing
Courtesy of FORD MOTOR COMPANY	205-115 Installer, Drive Pinion Seal TKIT-2000-F/FM/FLM
Courtesy of FORD MOTOR COMPANY	205-295 Remover, Bearing (Main Tool)
Courtesy of FORD MOTOR COMPANY	205-329 Mounting Bracket, Engine/Differential
Courtesy of FORD MOTOR COMPANY	303-435 Mounting Stand
Courtesy of FORD MOTOR COMPANY	303-435-06 Mounting Bracket for 303-435
Courtesy of FORD MOTOR COMPANY	308-044 Installer, Transmission Extension Housing Bushing/Seal
Courtesy of FORD MOTOR COMPANY	308-195 Collet for 205-295
Courtesy of FORD MOTOR COMPANY	308-208 Remover, Halfshaft Seal
Courtesy of FORD MOTOR COMPANY	308-214 Remover, Hydraulic Line Spring Clip
Courtesy of FORD MOTOR COMPANY	308-230 Support Plate, Gear Removal (Dia 85.1 mm)
Hydraulic Press
Vise Jaw Protectors

Materials

Name	Specification
Motorcraft® Gasket Maker TA-16	WSK-M2G348-A5
Motorcraft® Dual Clutch Transmission Fluid XT-11-QDC	WSS-M2C200-D2