LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transmission - 6-Speed Automatic Transmission - 6F15 (2 Of2)) >> Removal And Installation >> Selector Shaft Seal >> Installation

Selector Shaft Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Using the special tool, install the new selector shaft seal. Use Special Service Tool: 307-581 Manual lever seal installer.
    GFD268022Courtesy of FORD MOTOR COMPANY
  2. Install the TR sensor. Refer to: Transmission Range (TR) Sensor .
scientia non olet · About LEMON Manuals