LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transmission - 6-Speed Automatic Transmission - 6F15 (2 Of2)) >> Removal And Installation >> Output Shaft Speed (OSS) Sensor >> Removal

Output Shaft Speed (OSS) Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the main control valve body. Refer to: Main Control Valve Body .
  2. Remove the OSS sensor bolt and the OSS sensor.

    Torque: 89 lb.in (10 Nm)

GFD268018Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals