Pinpoint Test E : U0131: Notes
WARNING: This page is about a different variant/trim than selected.
Normal Operation and Fault Conditions
REFER to: Communications Network - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0131 | Lost Communication With Power Steering Control Module: Missing Message | A continuous memory DTC that sets in the BCM if messages from the PSCM over the HS-CAN are missing. |
Possible Sources
- Communication network concern
- Battery voltage concern
- BCM
- PSCM