LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine - 2.3L ECOBOOST (257KW/350PS) - Mi4) >> Removal And Installation >> Engine Mount >> Installation

Engine Mount: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Torque

    : 106 lb.in (12 Nm)

    GFD265850Courtesy of FORD MOTOR COMPANY
    1. Torque

      : 59 lb.ft (80 Nm)

    2. NOTE: Only tighten the bolts finger tight at this stage.
    GFD265842Courtesy of FORD MOTOR COMPANY
  2. Remove the following items:

    1. Use the General Equipment: Wooden Block. Use the General Equipment: Trolley Jack

    GFD264818Courtesy of FORD MOTOR COMPANY
  3. Torque

    : 66 lb.ft (90 Nm)

    GFD265851Courtesy of FORD MOTOR COMPANY
    GFD265853Courtesy of FORD MOTOR COMPANY
  4. Refer to: JACKING AND LIFTING - OVERVIEW
GFD265852Courtesy of FORD MOTOR COMPANY
GFD265854Courtesy of FORD MOTOR COMPANY