LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Electronic Engine Controls - 2.0L ECOBOOST (184KW/250PS) - Mi4) >> Removal And Installation >> Cylinder Head Temperature (CHT) Sensor >> Installation

Cylinder Head Temperature (CHT) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
    • To install, reverse the removal procedure.

    • Install a new CHT sensor.

  2. Connect the CHT sensor electrical connector and slide the insulator down.
GFD267369Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals