LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Electronic Engine Controls - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor >> Removal

Engine Coolant Temperature (ECT) Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the engine appearance cover.
    GFD264596Courtesy of FORD MOTOR COMPANY
  2. NOTE: Be prepared to collect escaping fluid.

    • Disconnect the electrical connector.

    • Remove the retaining spring clip.

    • Remove the ECT sensor.

GFD267311Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals