LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Electronic Engine Controls - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor >> Installation

Engine Coolant Temperature (ECT) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. NOTE: Make sure that fluid level is to the MAX mark.

    Check level of coolant and add to fill line.

GFD265865Courtesy of FORD MOTOR COMPANY