LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Fuel Charging And Controls - Turbocharger - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Turbocharger Coolant Supply Tube >> Installation

Turbocharger Coolant Supply Tube: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install and connect the turbocharger coolant supply tube and the hose clamp. Use the General Equipment: Hose Clamp Remover/Installer
    GFD267089Courtesy of FORD MOTOR COMPANY
  2. Connect the turbocharger coolant supply tube and the hose clamp. Use the General Equipment: Hose Clamp Remover/Installer
    GFD267088Courtesy of FORD MOTOR COMPANY
  3. Fill and bleed the cooling system. Refer to: COOLING SYSTEM DRAINING, VACUUM FILLING AND BLEEDING .
scientia non olet · About LEMON Manuals