LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Oil Pan >> Removal

Oil Pan: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. Remove the catalytic converter. Refer to: CATALYTIC CONVERTER .
  3. WARNING: Be prepared to collect escaping fluid.

    Remove the drain plug, drain engine oil and install drain plug. Use the General Equipment: Oil Drain Equipment

    Torque

    : 18 lb.ft (25 Nm)

    GFD264834Courtesy of FORD MOTOR COMPANY
  4. WARNING: Be prepared to collect escaping fluid.

    Remove and discard the engine oil filter. Use the General Equipment: Oil Drain Equipment

    GFD264856Courtesy of FORD MOTOR COMPANY

    6-Speed Manual Transmission - B6 

  5. Remove the bolts and the oil pan.
    GFD264860Courtesy of FORD MOTOR COMPANY

    6-Speed Automatic Transmission - 6F15 

  6. Remove the bolts and the oil pan.
GFD264861Courtesy of FORD MOTOR COMPANY