LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus SEL, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Exterior Trim And Ornamentation) >> Removal And Installation >> Power Running Board (PRB) Module >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    Remove the LH B-pillar trim panel. For additional information, refer to Interior Trim and Ornamentation .

  1. 2.

    Disconnect the Power Running Board(PRB) module electrical connectors.

  1. 3.

    Remove the 2 bolts and the PRB module assembly.

  1. 4.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals