Removal And Installation

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear .

2.

Remove the dust boot cover.

GFD137872

Courtesy of FORD MOTOR COMPANY

3.

Remove the nut and the rear window glass handle.
- To install, tighten to 18 Nm (159 lb-in).

GFD137873

Courtesy of FORD MOTOR COMPANY

4.

Open the liftgate glass.

5.

Remove the nuts and the rear window wiper striker and wiper pivot shaft assembly.
- To install, tighten to 6 Nm (53 lb-in).

GFD137889

Courtesy of FORD MOTOR COMPANY

6.

To install reverse the removal procedure.