Overview - Active Park Assist
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Vehicles equipped with active park assist use a different parking aid sensor. The PAM supplies a 12v reference voltage and a ground. The signal circuit is a LIN used to communicate the sensor data with the PAM.
The active park assist system is a supplementary parking system that assists the operator with the task of parking in three ways:
- Parallel Park Assist (activated by pushing the active park assist switch once) - Detects the available parking space and automatically steers the vehicle into the space while the operator controls the accelerator, gearshift and brakes.
- Perpendicular Park Assist (activated by pushing the active park assist switch twice) - Detects an available parking space and automatically steers the vehicle into the space while the operator controls the accelerator, gearshift and brakes.
- Parallel Park Out Assist (activated by pushing the active park assist switch once) - Analyzes the parking space currently occupied by the vehicle and automatically steers the vehicle out of the space while the operator controls the accelerator, gearshift and brakes.
The system visually and/or audibly instructs the operator to park the vehicle through messages in the centerstack infotainment display and audio system warning chimes.
The PAM uses input from the active park assist sensors, parking aid sensors and a geometrical equation to determine whether the vehicle fits in the parking space and to determine the correct steering angles to request from the PSCM during the parking maneuvers. The system visually and/or audibly instructs the operator to park the vehicle through messages in the centerstack infotainment display and audio system warning chimes.