Parking Aid Sensors
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Vehicles equipped with active park assist use a different parking aid sensor. The PAM supplies a 12v reference voltage and a ground. The signal circuit is a LIN used to communicate the sensor data with the PAM.
The parking aid sensors are wide beam ultrasonic sensors. The sensors continuously send out ultrasonic signals to detect objects and communicate the information back to the PAM.
Only objects which reflect enough sound waves are detected by the sensors. This varies due to the shape, surface properties and size of objects being detected. Incorrect sensor alignment, dirt covered sensors, heavy rain or snow can cause objects not to be recognized.