BCM DTC Chart
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| DTC | Description | Action |
|---|---|---|
| B1088:86 | LIN Bus "B": Signal Invalid | GO to Pinpoint Test A |
| B1088:88 | LIN Bus "B": Bus Off | GO to Pinpoint Test A |
| B12BD:01 | Rear Camera: General Electrical Failure | GO to Pinpoint Test F |
| B12BD:02 | Rear Camera: General Signal Failure | GO to Pinpoint Test F |
| B12BD:49 | Rear Camera: Internal Electronic Failure | GO to Pinpoint Test A |
| B12BD:55 | Rear Camera: Not Configured | Sets in continuous memory in the BCM when the rear parking aid camera is not configured. Using a diagnostic scan tool, PERFORM the rear parking aid camera configuration. |
| B12BD:83 | Rear Camera: Value of Signal Protection Calculation Incorrect | GO to Pinpoint Test F |
| B12BD:86 | Rear Camera: Signal Invalid | GO to Pinpoint Test F |
| U0264:87 | Lost Communication With Camera Module-Rear: Missing Message | GO to Pinpoint Test F |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Body Control Module (BCM) . |