LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus S, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center And Warning Chimes (Except Electric) (2 Of2) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test Ag : The Compass Display Is Inoperative (Without Touchscreen Audio) >> Pinpoint Test Ag : The Compass Display Is Inoperative (Without Touchscreen Audio)

Pinpoint Test Ag : The Compass Display Is Inoperative (Without Touchscreen Audio)

  1. AG1 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST

    • Using a diagnostic scan tool, perform the IPC self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to DTC Chart: IPC .
    No  GO to  AG2
  2. AG2 RETRIEVE THE RECORD DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE GPSM (GLOBAL POSITIONING SYSTEM MODULE) SELF-TEST

    • Using a diagnostic scan tool, perform the GPSM self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to: Information and Entertainment System .
    No  GO to  AG3
  3. AG3 CHECK THE BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, check the BCM Continuous Memory Diagnostic Trouble Codes (CMDTCs).

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to: Body Control Module (BCM) .
    No  INSTALL a new GPSM. REFER to: Global Positioning System Module (GPSM) . TEST the system for normal operation. If the compass is still inoperative, Refer to IPC GUIDED ROUTINE TESTING