LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus S, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center And Warning Chimes (Except Electric) (2 Of2) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AY : The Parking Brake Warning Chime Is Inoperative >> Pinpoint Test AY : The Parking Brake Warning Chime Is Inoperative

Pinpoint Test AY : The Parking Brake Warning Chime Is Inoperative

  1. AY1 CHECK THE SAFETY BELT WARNING CHIME OPERATION

    • Ignition OFF.

    • Ignition ON.

    • Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN.

    Does the safety belt warning chime operate? 

    Yes  GO to  AY2
    No  GO to Pinpoint Test A 

  2. AY2 CHECK THE BRAKE WARNING INDICATOR OPERATION

    • Apply the parking brake.

    • Observe the brake warning indicator.

    Does the brake warning indicator illuminate? 

    Yes  GO to  AY3
    No  GO to Pinpoint Test Q 

  3. AY3 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST

    • Using a diagnostic scan tool, perform the IPC self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to DTC Chart: IPC .
    No  GO to  AY4

  4. AY4 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE BCM (BODY CONTROL MODULE) SELF-TEST

    • Using a diagnostic scan tool, perform the BCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to: Body Control Module (BCM) .
    No  Refer to BCM GUIDED ROUTINE TESTING
scientia non olet · About LEMON Manuals