Pinpoint Test AU : The Key-In-Ignition Warning Chime Is Inoperative (Without Intelligent Access [IA]): Notes
Refer to Power Distribution for schematic and connector information.
Normal Operation and Fault Conditions
See Key-In-Ignition Warning Chime. REFER to: Warning Chimes - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10F1:13 | Key In Switch: Circuit Open | An on-demand DTC that sets if the BCM detects an open on the key-in-ignition switch input circuit or if the BCM detects ignition start, run/start or run/accessory inputs without the key-in-ignition input. |
Possible Sources
- Interior lighting concern
- Wiring, terminals or connectors
- Key-in-ignition warning switch (part of the ignition switch) (without push button start)
- BCM
- IPC