LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Focus S, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Aid - Vehicles With: Rear Parking Aid (Except Electric) >> Diagnosis And Testing >> Parking Aid >> Pinpoint Tests >> Pinpoint Test T : U0257 >> Notes

Pinpoint Test T : U0257: Notes

Refer to Audio System/Navigation for schematic and connector information.

Normal Operation and Fault Conditions 

The PAM uses the BCM and the IPC as a gateway modules to communicate with the FCDIM. The PAM communicates over the HS-CAN with the BCM. The BCM communicates over the MS-CAN with the IPC and the IPC communicates over the I-CAN with the FCDIM.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0257 Lost Communication With Front Controls / Display Interface Module: No Subtype Information A CMDTC that sets when the PAM is unable to communicate with the FCDIM for 0.5 seconds or more after the active park assist system has been activated.

Possible Sources 

scientia non olet · About LEMON Manuals