Network Message Chart - Gauges
Module Network Input Messages - Instrument Panel Cluster (IPC)
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Accessory power usage data | PCM | Input used for the accessory power gauge. |
| Battery state of charge data | BECM | Input used for the high voltage battery state of charge gauge and for the debt-surplus gauge. |
| Charge/discharge display | PCM | Inputs used for the brake coach gauge. |
| Charge point display | APIM | Input used for the debt-surplus gauge. |
| Climate control power usage data | PCM | Input used for the accessory power gauge. |
| Ignition status | BCM | Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting. |
| Navigation destination | FCDIM | Input used for the debt-surplus gauge. |
| Odometer count | ABS module | Input used for the debt-surplus gauge. |
| Vehicle efficiency data | PCM | Input used for the debt-surplus gauge and for the consumption gauge. |
| Vehicle range display data | PCM | Input used for the high voltage battery state of charge gauge and for the debt-surplus gauge. |
| Vehicle speed | ABS module | Vehicle speed data used for speedometer indication. |