LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fiesta Titanium, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Electronic Engine Controls - 1.6L ECOBOOST (132KW/180PS) - Sigma) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor >> Installation

Engine Coolant Temperature (ECT) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Check the coolant level in the degas bottle and add coolant as necessary.

    Material: Motorcraft® Orange Prediluted Antifreeze/Coolant / VC-3DIL-B (WSS-M97B44-D2)

scientia non olet · About LEMON Manuals