LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fiesta Titanium, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Electronic Engine Controls - 1.6L ECOBOOST (132KW/180PS) - Sigma) >> Removal And Installation >> Clutch Pedal Position (CPP) Switch >> Removal

Clutch Pedal Position (CPP) Switch: Removal

WARNING: This page is about a different variant/trim than selected.

Top of travel switch 

  1. Disconnect the electrical connector and remove CPP switch from the bracket.
    GFD301031Courtesy of FORD MOTOR COMPANY

    Bottom of travel switch 

  2. Disconnect the electrical connector and remove CPP switch from the bracket.
GFD301032Courtesy of FORD MOTOR COMPANY