LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Fiesta Titanium, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine - 1.6L ECOBOOST (132KW/180PS) - Sigma) >> Removal And Installation >> Engine Mount >> Removal

Engine Mount: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the degas bottle. Refer to: Degas Bottle .
  2. Using the floor jack and a wooden block, support the engine. Use the General Equipment: Trolley Jack. Use the General Equipment: Wooden Block
    GFD300328Courtesy of FORD MOTOR COMPANY
    1. Remove the nuts.
    2. Remove the bolts and the engine mount.
GFD300329Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals