Symptom Chart: Information And Message Center - Displays
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Condition | Possible Sources | Actions |
|---|---|---|
| The message center is not operating correctly | Refer to the Pinpoint Test | GO to Pinpoint Test AN |
| The LH or RH message center display is blank | Refer to the Pinpoint Test | GO to Pinpoint Test A |
| A virtual display is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| The compass is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AP |
| The DTE-Average Fuel Economy (AFE) display is inoperative | IPC | CHECK the operation of the fuel gauge, the speedometer and the odometer. If the fuel gauge does not operate correctly, GO to Pinpoint Test C If the speedometer does not operate correctly, GO to Pinpoint Test E If the odometer does not operate correctly, GO to Pinpoint Test G If the speedometer, the fuel gauge and the odometer operate correctly, Refer to IPC GUIDED ROUTINE TESTING |
| The DTE display is incorrect or fluctuates | Refer to the Pinpoint Test | GO to Pinpoint Test AQ |
| The digital speedometer displays the incorrect speed | Refer to the Pinpoint Test | DIAGNOSE the adaptive cruise control indicator. GO to Pinpoint Test AY |
| The engine hours and engine idle hours display is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AR |
| The lane departure display is inoperative | Lane departure warning system concern | DIAGNOSE the lane keeping aid or lane keeping alert doesn't turn on or activate. REFER to: Lane Keeping System . |
| The odometer display is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test G |
| The off road and powertrain distribution display is inoperative - mid and high level instrument cluster | Refer to the Pinpoint Test | GO to Pinpoint Test AS |
| The outside air temperature display is incorrect or inoperative (displayed in the FCIM) | Refer to the Pinpoint Test | GO to Pinpoint Test AT |
| The progressive range select/SST display is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AH |
| The selectable drive mode (2WD)/terrain management (4WD) display is inoperative or doesn't display the correct features | Refer to the Pinpoint Test | GO to Pinpoint Test AU |
| The TPMS display does not show all tire pressures or is inoperative | Refer to the Pinpoint Test | VERIFY the message center is set to display the TPMS tire pressures. REFER to the Owner's Literature for message center navigation. If the message center is set to display the tire pressures, DIAGNOSE the TPMSRTT indicator. GO to Pinpoint Test AM If the message center is not set to display the TPMS tire pressures, EXPLAIN to the customer how to navigate the message center menu to display the TPMS tire pressures. |
| The trailer information display is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test AV |