Pinpoint Test As : The Off Road And Powertrain Distribution Display Is Inoperative - Mid And High Level Instrument Cluster: Notes

The Off Road And Powertrain Distribution Display Is Inoperative - Mid and High Level Instrument Cluster 

Normal Operation and Fault Conditions 

See Off Road Mode And Powertrain Distribution Display. REFER to: Message Center - System Operation and Component Description .

If the 4WD status display, gear lever position, wheel torque or vehicle speed messages are missing for less than 5 seconds, the IPC defaults the display fill area in front of the front wheels and behind the rear wheels and the off road vehicle pitch display to the last setting based upon the last message received.

If the 4WD status display, gear lever position, wheel torque or vehicle speed messages are missing for 5 seconds or longer, the IPC defaults the display fill area in front of the front wheels and behind the rear wheels off and the off road vehicle pitch display to 0 with the text display blank.

If the vehicle roll angle display or vehicle pitch angle display messages are missing for less than 5 seconds, the IPC defaults the roll and pitch display to the last display based on the last data received.

If the vehicle roll angle display or vehicle pitch angle display messages are missing for 5 seconds or longer, the IPC defaults the roll and pitch display to 0 with the text display blank.

Possible Sources 

• Communication concern
• ABS module concern
• GWM concern
• PCM concern
• TCM concern
• TCCM concern
• IPC