LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Expedition XLT, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Aid - Vehicles With: Rear Parking Aid >> Removal And Installation >> Parking Assist Control Module (PAM) >> Installation

Parking Assist Control Module (PAM): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, complete the PMI process for the PAM following the on-screen instructions.