Network Message Chart
Module Network Input Messages - Instrument Panel Cluster (IPC)
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Active park assist chime request | PAM | Input used to control the active park assist chime. |
| Adaptive cruise control warning request | CCM | Input used to control the adaptive cruise control warning chime. |
| Alarm/key programming chime request | BCM | Input used for the keyless key programming chime. |
| Alarm mode | BCM | Input used for the perimeter alarm chime. |
| BLIS® status | BCM | Input used for the BLIS®/ CTA chime. |
| Driver safety belt status | RCM | Input used for the driver safety belt component of the Belt-Minder® chime. |
| Forward collision warning status message | CCM | Input used to control the forward collision warning chime. |
| Gear lever position | TCM | Input used to control the Belt-Minder® chime. |
| Hill start assist chime request | ABS module | Input used to control the hill start assist chime. |
| Lane keeping system hands off display | IPMA | Input used to display the hands off steering wheel warning message. |
| Parking brake status | ABS module | Input used for the parking brake warning chime. |
| Passenger detect status | RCM | Input used for the passenger safety belt component of the Belt-Minder® chime. |
| Passenger safety belt status | RCM | Input used for the passenger safety belt component of the Belt-Minder® chime. |
| Passive key status | BCM | Input used for the key left in vehicle chime. |
| Passive key out of vehicle | BCM | Input used for the passive key not inside of the vehicle chime. |
| Perimeter alarm chime request | BCM | Input used to control the perimeter alarm chime. |
| Position light indication | BCM | Input used for the headlamps on chime. |
| Power mode status | BCM | Input used for the key-in-ignition warning chime. |
| Turn indicator command | BCM | Input used for the turn signals on chime tone (tick-tock). |
| Vehicle speed | ABS module | Input used for the vehicle speed component of the Belt-Minder® chime, the passive key out of the vehicle chime and the door ajar chime. |
Module Network Input Messages - ACM and DSP
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Belt-Minder® audio mute | IPC | Input used to mute the audio when the Belt-Minder® warning chime is requested. |
| Chime attenuation request | IPC | Input used to control the strength of the chime. |
| Chime source | IPC | Input used to configure the chime source (IPC or audio). |
| MyKey® volume limit | IPC | Input used to limit the audio volume when chimes are sounded using a MyKey® programmed key. |
| Power up chime modules | IPC | Input used to initiate the audio system as the chime source. |