Network Message Chart - Indicators
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| ABS warning indicator request | ABS module | Input used to control the ABS warning indicator. |
| Airbag indicator request | RCM | Input used to control the airbag warning indicator. |
| Alarm mode | BCM | Input used to control the information indicator based on PATS and perimeter alarm status. |
| Blind Spot Information System (BLIS®) system status | BCM | Input used to control the Blind Spot Information System (BLIS®) indicator. |
| Blind Spot Information System (BLIS®) status - driver side | SODL | Input used to control the Blind Spot Information System (BLIS®) indicator. |
| Blind Spot Information System (BLIS®) status - passenger side | SODR | Input used to control the Blind Spot Information System (BLIS®) indicator. |
| Brake fluid level low request | BCM | Input used to control the brake warning indicator for the brake fluid level input. |
| Brake (red) warning indicator request | ABS module | Input used to control the brake warning indicator for an ABS fault input. |
| Charging system indicator request | BCM | Input used to control the charging system warning indicator. |
| Fog lamp indicator request | BCM | Input used to control the fog lamp indicator. |
| High beam indicator request | BCM | Input used to control the high beam indicator. |
| MIL request | PCM | Input used to control the MIL. |
| Oil pressure warning | PCM | Input used to control the low oil pressure warning indicator. |
| Parking brake indicator request | ABS module | Input used to control the yellow parking brake warning indicator. |
| Parking brake status | ABS module | Input used to control the brake warning indicator for the parking brake applied status. |
| Passenger detect status | OCSM | Input used to control the safety belt warning indicator. |
| Position light indication | BCM | Input used to control the lights on indicator. |
| Power system status | BCM | Input used to control the charging system warning indicator. |
| Safety belt status | RCM | Input used to control the safety belt warning indicator. |
| Stability-traction control indication | ABS module | Input used to control the stability-traction control indicator (sliding car icon). |
| Stability-traction control disabled indicator request | ABS module | Input used to control the stability-traction control disabled indicator (sliding car OFF icon). |
| Stop-start standby indication (1.5L or 2.0L only) | PCM | Input used to control the auto stop-start indicator. |
| Tire pressure indication | BCM | Input used to control the TPMS indicator |
| Transmission mode display | PCM | Input used to control the SelectShift® segment of the PRNDL display. |
| Transmission gear display | PCM | Input used to control the PRNDL display. |
| Trailer lamp connection status | TRM | Input used to disable the Blind Spot Information System (BLIS®) and turn on the Blind Spot Information System (BLIS®) indicator when a trailer is connected. |
| Turn indicator command | BCM | Input used to control the RH/ LH turn or hazard indicators. |