Transport and Factory Mode Deactivation

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Deactivation 

1. Place the ignition in the OFF position.
2. Verify the battery is fully charged. Refer to: Battery .
3. NOTE: On vehicles with Push-Button Start, place a programmed passive key in the PATS backup starting location.

   Place the ignition in the ON position.

4. NOTE: Steps 4 and 5 must be carried out within 10 seconds.

   Press and release the brake pedal 5 times.

5. Press and release the hazard switch 2 times (on, off).
6. NOTE: When exiting Factory mode, the IPC message center indicates NORMAL MODE when the procedure has been successfully completed.

   Place the ignition in the OFF position.