Pinpoint Test B : B1B57:11: Notes
Refer to PARKING AID for schematic and connector information.
Normal Operation and Fault Conditions
The PAM supplies voltage to the front parking aid sensors and active park assist sensors (if equipped) via a common circuit.
PAM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B57:11 | Front Sensors Power Circuit: Circuit Short To Ground | Sets in continuous memory and on-demand in the PAM when the front sensor voltage supply circuit is shorted to ground or to the front sensor ground circuit. |
Possible Sources
- Wiring, terminals or connectors
- Front parking aid sensor
- Front active park assist sensor (if equipped)
- PAM
NOTE:
Before disconnecting the PAM or any of the parking aid sensors, verify the connectors are properly seated and latched.