Active Guidelines

The rear parking aid camera active guidelines feature displays guidelines on top of the video image to assist the driver with maneuvering a vehicle into a space. The guidelines display the expected path of vehicle travel based on the current steering angle.

The rear parking aid camera active guidelines feature displays dynamic guidelines that correspond to the projected path of the vehicle travel based on the current steering angle. Several modules are involved in generating the steering angle data used to support the active guidelines. The PSCM generates the steering angle message that is sent to the BCM via the HS-CAN1 and HS-CAN2, with the GWM acting as the gateway. The BCM then sends the steering angle data to the rear parking aid camera via the LIN circuit. The camera uses this data to generate the active guidelines over the video image.

Active guidelines are not shown when the liftgate is open.

If the steering wheel is in the straight-ahead position the active guidelines are not shown.

If the vehicle is equipped with a factory TRM, the active guidelines are not shown when a trailer is electrically connected to the vehicle.