Glow Plugs: Installation

WARNING: This page is about a different variant/trim than selected.

1.

Install and tighten the glow plugs.
Torque: 115 lb.in (13 Nm)

GFD145030

Courtesy of FORD MOTOR COMPANY

2.

Install the glow plug wire harness and tighten the glow plug wire harness nuts finger tight at this stage.
Torque:

Stage 1: 9 lb.in (1 Nm)

Stage 2: 21 lb.in (2.4 Nm)

GFD145029

Courtesy of FORD MOTOR COMPANY

3.

Install the intake manifold. Refer to: Intake Manifold .