Inspection and Verification
WARNING: This page is about a different variant/trim than selected.
- 1.
Verify the customer concern.
- 2.
Visually inspect for obvious signs of mechanical damage.
Visual Inspection Chart
| Mechanical |
Damaged or contaminated accessory drive belt
Damaged or contaminated pulley(s)
Incorrect accessory drive belt
Incorrect fitment of the accessory drive belt
Generator
Air conditioning (A/C) compressor
Coolant pump
Power steering pump
Pulley(s)
Loose hardware |
- 3.
If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.