LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Transit Connect XLT, Van Passenger >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Safety Belt System >> Diagnosis And Testing >> Seatbelt Systems >> Functional Test(s) >> Functional Test - Seatbelt Retractor, Automatic Locking Retractor (ALR) Mode

Functional Test - Seatbelt Retractor, Automatic Locking Retractor (ALR) Mode

  1. Position the seat backrest fully upright (if adjustable).
  2. Position the seatbelt shoulder height adjuster (if equipped) in the full down or up position.
  3. Fasten the seatbelt.
  4. Pull out the seatbelt webbing until the Automatic Locking Retractor (ALR) feature is activated.
  5. Allow the seatbelt webbing to retract until it stops.
  6. Pull on the seatbelt webbing to make sure the seatbelt retractor has remained in the Automatic Locking Retractor (ALR) mode. If the seatbelt retractor is not locked, install a new seatbelt retractor.
  7. Unfasten the seatbelt and allow the seatbelt webbing to retract to its stowed position.
  8. Pull out and retract the seatbelt webbing to verify the seatbelt retractor has converted automatically out of Automatic Locking Retractor (ALR) mode. If the seatbelt retractor remains locked in the Automatic Locking Retractor (ALR) mode, install a new seatbelt retractor.
scientia non olet · About LEMON Manuals