P0394 - Camshaft Position Sensor B Circuit Intermittent (Bank 2)
P0394 - CAMSHAFT POSITION SENSOR B CIRCUIT INTERMITTENT (BANK 2)
| Description: | This DTC sets when the CMP21 (6.2L) or CMP22 (all others) circuit signal is intermittent. For additional camshaft position (CMP) sensor location information, refer to ENGINE CONTROL COMPONENTS . | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Harness routing, harness alterations, incorrect shielding, or electrical interference from other systems may have an intermittent impact on the CMP signal. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DR . | ||