P0223 - Throttle / Pedal Position Sensor / Switch B Circuit High
P0223 - THROTTLE / PEDAL POSITION SENSOR / SWITCH B CIRCUIT HIGH
| Description: | This DTC sets when the electronic throttle control (ETC) throttle position (TP) sensor signal is too high. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This concern exhibits a symptom of limited power. A TP2 PID reading greater than 4.75 volts in ignition ON, engine OFF or ignition ON, engine running indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DV . | ||