P0097 - Intake Air Temperature Sensor 2 Circuit Low (Bank 1)
P0097 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT LOW (BANK 1)
| Description: | This DTC sets when the intake air temperature 2 (IAT2) sensor signal is less than the self-test minimum. The IAT2 sensor minimum is 0.2 volt. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IAT2 sensor PID value. A typical IAT2 sensor temperature should be greater than the IAT sensor temperature. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DN . | ||