Fuel Pump Duty Cycle Output From PCM
| FP Duty Cycle Command | PCM Status | Fuel Pump Control Module Actions |
|---|---|---|
| 0-15% | Invalid OFF duty cycle. | The fuel pump control module sends a 20% duty cycle signal on the fuel pump monitor (FPM) circuit. The fuel pump is OFF. |
| 5-51% | Normal operation. | The fuel pump control module operates the fuel pump at the speed requested. FP duty cycle times 2 equals pump speed % of full ON. For example, FP duty cycle equals 42%. 42 times 2 equals 84. Pump is run at 84% of full ON. The fuel pump control module sends a 60% duty cycle signal on FPM circuit. |
| 51-67% | Invalid ON duty cycle. | The fuel pump control module sends a 20% duty cycle signal on the FPM circuit. The fuel pump is OFF. |
| 67-83% | Valid OFF duty cycle. | The fuel pump control module sends a 60% duty cycle signal on FPM circuit. The fuel pump is OFF. |
| 83-100% | Invalid ON duty cycle. | The fuel pump control module sends a 20% duty cycle signal on the FPM circuit. The fuel pump is OFF. |
For additional information, refer to POWERTRAIN CONTROL HARDWARE , Fuel Pump Control Module.