LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Transit Connect XLT, Van Passenger >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test C : The Speedometer Is Inoperative >> Pinpoint Test C : The Speedometer Is Inoperative

Pinpoint Test C : The Speedometer Is Inoperative

  1. C1 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST

    • Ignition ON.

    • Using a diagnostic scan tool, perform the IPC self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to DTC Chart: IPC .
    No  GO to  C2

  2. C2 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE BCM (BODY CONTROL MODULE) SELF-TEST

    • Using a diagnostic scan tool, perform the BCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to: Body Control Module (BCM) .
    No  GO to  C3

  3. C3 CARRY OUT THE SPEEDOMETER ACTIVE COMMAND USING A DIAGNOSTIC SCAN TOOL

    • Using a diagnostic scan tool, view the IPC Parameter Identifications (PIDs).

    • NOTE: Make sure to set the diagnostic scan tool to 0 or full cold before beginning this step.

      Select the IPC speedometer (SPDOMETER) PID.

    • Command the speedometer on and off while monitoring the speedometer.

    Does the speed begin at 0 km/h (0 mph) move to 241 km/h (150 mph) and return to 0 km/h (0 mph)? 

    Yes  DIAGNOSE any ABS module Diagnostic Trouble Codes (DTCs). Refer to: Anti-Lock Brake System (ABS) and Stability Control .
    No  Refer to IPC Hardware Testing .
scientia non olet · About LEMON Manuals