LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Transit Connect XLT, Van Passenger >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test At : U0100:00 >> Notes

Pinpoint Test At : U0100:00: Notes

Normal Operation and Fault Conditions 

Once the IPC sets DTC U0100:00, multiple gauges or indicators are likely to be inoperative in the IPC. Other modules that require data from the IPC all set communication Diagnostic Trouble Codes (DTCs) and may also exhibit system function concerns.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0100:00 Lost Communication With ECM/PCM "A": No Sub-Type Information Sets in continuous memory in the IPC if powertrain data messages received from the PCM through the BCM over the MS-CAN are missing for longer than 2 seconds.

Possible Sources 

scientia non olet · About LEMON Manuals