Pinpoint Test AO : The Key-In-Ignition Warning Chime Is Inoperative: Notes
Refer to.Power Distribution/BCM for schematic and connector information.
Normal Operation and Fault Conditions
See Key-In-Ignition Warning Chime. Refer to: Warning Chimes - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10F1:13 | Key In Switch: Circuit Open | An on-demand DTC that sets if the BCM detects an open on the key-in-ignition switch input circuit or if the BCM detects ignition START, RUN/START or RUN/ACC inputs without the key-in-ignition input. |
Possible Sources
- Wiring, terminals or connectors
- Interior lighting concern
- Key-in-ignition warning switch (part of the ignition switch)
- BCM
- IPC