PCM DTC Chart
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods . for information about these practices.
| DTC | Description | Action |
|---|---|---|
| P0562 | System Voltage Low | GO to Pinpoint Test B |
| P0563 | System Voltage High | GO to Pinpoint Test A |
| P065B | Generator Control Circuit Range/Performance | GO to Pinpoint Test B |
| P065C | Generator Mechanical Performance | GO to Pinpoint Test C |
| P0A3B | Generator Over Temperature | CARRY OUT self-test of the PCM and DIAGNOSE any cooling fan Diagnostic Trouble Codes (DTCs). If no cooling fan Diagnostic Trouble Codes (DTCs) are present, INSTALL a new generator. REFER to: Generator - 2.5L Duratec (125kW/170PS) . |
| P1397 | System Voltage Out Of Self Test Range | If combined with P0562, GO to Pinpoint Test B If combined with P0563, GO to Pinpoint Test A |
| U012D | Lost Communication With Generator Control Module | GO to Pinpoint Test E |
| U042E | Invalid Data Received From Generator Control Module | GO to Pinpoint Test E |
| All Other DTCs | - | REFER to: Electronic Engine Controls . |
BCM DTC Chart
| DTC | Description | Action |
|---|---|---|
| All Other DTCs | - | REFER to: Body Control Module (BCM) . |