Pinpoint Test C : Both Rear Power Windows Are Inoperative: Notes

Refer to Power Windows for schematic and connector information.

Normal Operation and Fault Conditions 

When the master window control lock-out switch is in the UNLOCK position, voltage is supplied to the LH and RH rear window control switches. The rear windows share the same fuse and common ground circuit (provided through the master window control switch).

Possible Sources 

• Fuse
• Wiring, terminals or connectors
• Window control switch

Visual Inspection and Diagnostic Pre-checks 

• Make sure the master window control lock-out switch is in the UNLOCK position.
• Verify BJB fuse 28 (25A) is OK.