Pinpoint Test T : U0155:00: Notes
Normal Operation and Fault Conditions
The DDM/ PDM receive odometer data from the IPC over the MS-CAN. There are no noticeable symptoms if either module does not receive the odometer data.
DDM/ PDM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub-Type Information | Sets when the DDM/ PDM detects data messages are missing from the IPC. |
Possible Causes
- Network communication concern
- DDM/ PDM
- IPC