Pinpoint Test B : No Power In Acc: Notes
Refer to Power Distribution/BCM for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Steering Wheel and Column Electrical Components - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B102F:2F | Auxiliary Switch: Signal Erratic | Sets during the on-demand self-test if the BCM detects no voltage from the ignition switch ACC-designated circuit. |
Possible Causes
- Wiring, terminals or connectors
- Ignition switch
- BCM