LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Transit Connect XLT, Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test A : U0100:00, U0101:00 >> Notes

Pinpoint Test A : U0100:00, U0101:00: Notes

Normal Operation and Fault Conditions 

The BCM communicates with the PCM over the HS-CAN. The TCM is contained inside the PCM and cannot be serviced separately. Refer to: Communications Network - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0100:00 Lost Communication With ECM/PCM "A": No Sub Type Information A continuous memory DTC that sets in the BCM if powertrain data messages received from the PCM over the HS-CAN are missing.
U0101:00 Lost Communication with TCM: No Sub Type Information A continuous memory DTC that sets in the BCM if powertrain data messages received from the PCM over the HS-CAN are missing.

Possible Sources 

scientia non olet · About LEMON Manuals