Symptom Chart: Steering Column Switches
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Symptom Chart
| Condition | Possible Sources | Actions |
|---|---|---|
| No power in all ignition switch positions | Refer to Pinpoint Test | GO to Pinpoint Test A |
| No power in ACC | Refer to Pinpoint Test | GO to Pinpoint Test B |
| No power in ON | Refer to Pinpoint Test | GO to Pinpoint Test C |
| No power in START | Refer to Pinpoint Test | ATTEMPT to start the engine. If the engine starts, RECHECK the ignition switch modes and DIAGNOSE the correct symptom. If the engine does not start, DIAGNOSE the starting system. Refer to the appropriate Engine article for the procedure. |
| The ignition lock cylinder cannot be returned to the OFF position | Refer to Pinpoint Test | GO to Pinpoint Test D |
| The ignition lock cylinder can be turned to the OFF position when the selector lever is not in PARK | Refer to Pinpoint Test | GO to Pinpoint Test E |
| The ignition lock cylinder is difficult to turn | Refer to Pinpoint Test | REFER to: Locks, Latches and Entry Systems - Vehicles With: One-Touch Open Driver Window . REFER to: Locks, Latches and Entry Systems - Vehicles With: One-Touch Open and Close Front Windows . |