LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2017 >> Transit Connect XL, Van Cargo >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Removal And Installation >> Selector Shaft Seal >> Removal

Selector Shaft Seal: Removal

  1. Remove the TR sensor. Refer to: Transmission Range (TR) Sensor .
  2. Remove and discard the selector shaft seal. Use the General Equipment: Flat Headed Screw Driver
GFD215100Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals