P0462 - Fuel Level Sensor A Circuit Low
P0462 - FUEL LEVEL SENSOR A CIRCUIT LOW
| Description: | This DTC sets when the FLI signal is less than the minimum allowable calibrated parameter for a specified fuel fill percentage in the fuel tank. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the FLI PIDs with the ignition ON, engine running. A concern is present if the FLI percentage PID is at 25% fill and the FLI voltage PIDs is less than 0.90 volt with a non-matching fuel gauge or the FLI percentage PIDs is at 75% fill and the FLI voltage PIDs is greater than 2.45 volts with a non-matching fuel gauge. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HX . | ||