P0327 - Knock/Combustion Vibration Sensor 1 Circuit Low (Bank1)
P0327 - KNOCK/COMBUSTION VIBRATION SENSOR 1 CIRCUIT LOW (BANK1)
| Description: | This DTC sets when the voltage goes outside a calibrated level. The knock sensor 1 (KS1) detects vibrations upon increase and decrease in engine RPM. The KS1 generates a voltage based on this vibration. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The vehicle may need to be driven for several minutes to set this DTC. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DG . | ||